This is how you can transform your Jenna Rda into an Rta with little to no extra work. All you have to do is remove your Rda cap and replace it with the Jenna Rta. We recommend you to make sure your cotton is full and fluffy in the shape of a bowtie before attaching the Rta. You can use the same builds you like in the Jenna or you can use your favorite Rta builds instead. Jai recommends to use above a 0.4ohm but it is up to you for how you like to vape. Building on the Jenna deck shouldn't be different at all for placement, you can use the build currently in your Jenna for the Rta, you can also watch the build video on Jais pateron if you would like to watch how we wick ours. Extra/Replacement parts such as O-rings/Glass/Cages are available only after you have successfully registered your Jenna Rta, without registration you are unable to acquire any accessories. The Jenna Rta is serialized inside of the chimney on a section that you can swap to another one if you own multiples. The Tank can be fully disassembled for cleaning and is very simple to put back together. It comes in a custom box burned by Brandon from Ravensmoon with the Jai Haze logo, Ravensmoon logo, Your Unique Serial Number and Jenna in script. Inside the box you will find a bag of all the orings you need for spares and your perfect new Jenna Rta nestled in foam for safe shipment. You can use the box for anything that you would like or keep it as a shelf piece. The Jenna in its entirety is made in the USA only, Jai strongly believes in keeping things made here and he honors that everytime he creates something. The Jenna has the name of Jais mother and this is such a wonderful tribute to such a wonderful woman.

Some Knowledge:
-To fill the tank: Turn off the juice control by rotating the top section of the tank (the design section with the glass) in the direction you would use to unscrew the whole tank, fill the tank and turn the juice flow control back in the direction that would tighten down your tank.
-To take on and off: Put the Jenna Rta on the same way as you would the normal Jenna Rda top cap by placing down and rotating until the cap is flush with your mod and you feel it catch to the deck. Simply pull to remove.
-To change the drip tip: You can use any 510, the one that comes with it is the perfect size for the Rta but if you would like to use your own 510 or one of the special edition drip tips you can. To remove the drip tip first turn off your juice flow control so your deck dosnt flood while we are swapping it out, next remove the section you would remove to fill it, next grab the two parts and pull or rock/wiggle until you are able to pull it out.
-I took off the glass and I don't know which way it goes- totally flat up, ridge down ;)

Tips:
-If you coil is not wet enough- remove some cotton or reposition it, if your getting dry hits it is because your cotton isn’t wicking as quickly as your vaping it which means the cotton is too dense.
-If you're getting spit back- There is not enough cotton beneath the ports in this scenario. To fix it you can adjust your cotton by bringing it up higher then the coil, make sure your cotton fills the well and isn't too loose. You can also add a small bit of cotton by cutting a very small piece and placing it on top of your current wicks, drip a bit of juice onto the new cotton and it will meld together like its one piece. You can also use the juice flow control by rotating it in the direction you would use to remove the tank by 1/4th or ½ for thinner juices.
-To test your build/cotton: Take a few consecutive hits in an attempt to dry out your coil, remove the tank and look at your wicks. If one side is white while the other is saturated you should remove some cotton from the side that white, its too thick and not wicking fast enough. For a supersaturated side you would add a bit of cotton or fluff your cotton back out. Once you get it once you'll remember how much cotton to use every time or if you already wick like this then you are ready to go.

-Personally we use 28/38 kanthal fused clapton (Jai Haze Fused Claptons) ohming out between a 0.8-1.0 and Mavatons cotton 

FOR INTERNATIONAL ORDERS CHOOSE DHL FOR SHIPPING, IT IS THE ONLY METHOD THAT GUARANTEES YOU GET IT, DO NOT CHOOSE FIRST CLASS MAIL UNLESS YOU WANT TO GET IT IN 2022 IN PIECES.  First class mail is untrackable once its leaves the USA until it gets to you, if it never makes it to you its gone forever and not insured.  Dont be a stingey sally on shipping for a priceless rta, if it gets lost there will not be another one sent out to you.